SAS3041X-R の FCode のパッチがリリースされてました。 修正内容は、volume を mix した場合の不具合? まぁいいや。というわけで、raidctl で firmware を流し込んで 1.00.39 → 1.00.40 へ。
firmware-version: '1.06.00.00'
mpt-version: '1.05'
assigned-addresses: 81000810.00000000.00000400.00000000.00000100.83000814.00000000.00104000.00000000.00004000.8300081c.00000000.00110000.00000000.000100
00.82000830.00000000.00200000.00000000.00200000
compatible: 'pci13e9,50' + 'pci1000,50' + 'AAPL,MPT'
model: 'LSI,1064'
reg: 00000800.00000000.00000000.00000000.00000000.01000810.00000000.00000000.00000000.00000100.03000814.00000000.00000000.00000000.00004000.0300081c.000
00000.00000000.00000000.00010000.02000830.00000000.00000000.00000000.00200000
version: '1.00.40'
wide: 00000010
device_type: 'scsi-2'
name: 'LSILogic,sas'
fcode-rom-offset: 00000000
66mhz-capable:
devsel-speed: 00000001
class-code: 00010000
interrupts: 00000001
latency-timer: 00000040
cache-line-size: 00000010
max-latency: 0000000a
min-grant: 00000040
subsystem-id: 00003020
subsystem-vendor-id: 00001000
revision-id: 00000002
device-id: 00000050
vendor-id: 00001000
Node 0xf00a2a78
compatible: 'st'
device_type: 'byte'
name: 'tape'
Node 0xf00a380c
compatible: 'sd'
device_type: 'block'
name: 'disk'
